The ModularIQ modules have a standard interface making them plug-and-play compatible with our core boards. Combined with the ModIQAPI™ software interface for control and interaction with each module, the ModularIQ modules enable you to effortlessly include new functions in your system.
A small selection of our modules are featured below. The large and constantly expanding array of core boards and compatible modules is always available through the Full product lists and in BoardBuilder™.
The TPA6017A2 from Texas Instruments is a stereo audio power amplifier in a 20-pin TSSOP thermally enhanced package capable of delivering 2 W of continuous RMS power per channel into 3-ohm loads. Internal gain control minimizes the number of external components needed, simplifying the design, and freeing up board space for other features.
The AMN2xxxx, AMN3xxxx and AMN4xxxx series of passive infrared MP motion sensors from Panasonic features extremely small size even with a built-in amplifier, making it ideal for use in miniaturized devices.
The ENC28J60 from Microchip is a stand-alone Ethernet controller module with integrated MAC and 10Base-T PHY that can be used with virtually all ModularIQ core boards. The ENC28J60 meets all of the IEEE 802.3 specifications and is fully compatible with 10/100/1000Base-T networks. It incorporates a number of packet filtering schemes to limit incoming packets and minimize processing overhead. It also provides an internal DMA module for fast data throughput and hardware assisted checksum calculation, which is used in various network protocols. The on-board Ethernet connector provides link and network activity indication LEDs.
The FT232R from FTDI is a USB to serial UART interface. By handling the entire USB protocol on-chip, this module enables USB communication with little use of system resources.